Need some help? Give us a call: toll-free phone
or email:
Intelix Logo

Intelix DIGI-HD60C-S HDBaseT HDMI Transmitter

HDMI, IR, RS232, and Ethernet over Single Twisted Pair

Intelix DIGI-HD60C-S HDMI, bi-directional IR, RS232 and Ethernet  via HDBaseT Transmitter

Intelix DIGI-HD60C-S HDMI, bi-directional IR, RS232 and Ethernet via HDBaseT Transmitter

The Intelix DIGI-HD60C-S HDBaseT HDMI Transmitter handles HDMI, bi-directional IR, bi-directional RS232 and Ethernet over a single twisted pair cable.

Leveraging HDBaseT technology for enhanced transmission over shielded and unshielded twisted pair cabling, the DIGI-HD60C-S
features power over HDBaseT (PoH), allowing flexible power on either the transmitter or receiver. Plus, other compatible PoH devices will power or be powered by the DIGI-HD60C-S.

The DIGI-HD60C-S supports 1080p, and 3D video up to 60 meters (195 feet).  4K x 2K up to 35 meters (115 feet).  Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations.  The system is HDMI v1.4 compliant, so it handles advanced HDMI video formats, including (but not limited to) 1080p, 4K, 2D, 3D, 120Hz, 240Hz, along with up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio lossless audio formats.

Use with any of these Intelix HDBaseT receivers:

Since the system can be powered from either the transmitter or the receiver end of the run, a power supply is not included, but you will need at least one power supply per run.  If you need a power supply, you may add it to your cart below.

As with virtually all systems that are based upon twisted-pair cable technology, the Intelix DIGI-HD60C-S HDBASET HDMI Transmitter will work with virtually any twisted-pair cables, including Cat-5e and Cat-6, but range and bandwidth is directly related to both distance and cable quality, so to get the highest resolutions at the greatest distances, you will want high-quality, low-skew cables.  If you want the very best pre-terminated cables, please consider our VideoTwist cables.

Like most Intelix products, the DIGI-HD60C-S comes with a two year limited warranty from the manufacturer.

Intelix's Description

DIGI-HD60C-S

HDMI, IR, RS232 transmitter with flexible power

The Intelix DIGI-HD-60C extends HDMI, IR, and RS232 over a single twisted pair cable. The DIGI-HD-60C
supports a 1080p video signal up to 60m, as well as 3D and 4K x 2K signals up to 35m.

Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. Flexible power design allows the units to be powered at either the TX or RX end, and only one power supply is required. The power supply (PS-24D-25) and IR accessories (DIGIB-EMT and DIGIB-EYE) are sold separately.

Features and Benefits

The DIGI-HD60-S is designed for use only with Intelix branded HDBaseT products and other HDBaseT products which conform to the reference circuit design. The power circuit may not be compatible with other HDBaseT devices and may damage them.

  • HDMI transmission up to 195 feet (60m)
  • 1080p, 4Kx2K & 3D compatible
  • CEC supported
  • Built-in surge protection
  • Diagnostic LEDs
  • HDCP compliant
  • Bidirectional Wideband IR and RS232 passthrough
  • PoE (Power over Ethernet) - power from RX (PS not included) when used with DIGI-HD60C-R
  • Locking Power Connector

Applications

  • Uses any Cat5/5e/6/6A twisted pair cabling
  • Extension of HDMI and control signals
  • Limited access to power for extenders on both ends
  • Ideal for Digital Signage, Home Theater, Commercial Video Systems

Technical Specifications

I/O Connections

  • HDMI: One (1) HDMI Type A Receptacle Connector
  • Twisted Pair: One (1) 8P8C port (Shielded RJ45)
  • IR Input: One (1) 3.5mm TRS Jack
  • IR Output: One (1) 3.5mm TS Jack
  • RS232: One (1) 3-Pole Euroblock connector
  • 24V DC Power: One (1) 5.5 mm Outside Diameter, 2.1 mm Inside Diameter Barrel (Locking)

Supported Audio and Video

  • Maximum Video Compatibility at 60m: Deep Color 36/30/24 Bit at 1080p
  • Maximum Video Compatibility at 35m: Deep Color 48 Bit at 1080p, 3D, and 4k x 2k
  • Video Compliance: HDMI, HDCP, and CEC (Consumer Electronics Control)
  • Embedded Audio: Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
  • Input DDC Signal: 5.0 volts p-p (TTL)
  • Input Video Signal: 0.5 to 1.0 volts p-p


HDBaseT Signal Characteristics

  • Maximum Distance: 60m
  • Cable Requirements: Category 5e, 6, or 6A with TIA/EIA-568B crimp pattern
  • Bandwidth: 10.2 Gbps
  • Gain: 0 dB – 10 dB at 100 MHz
  • Resolution Range: 800x600 – 1920x1200
  • Signal to Noise Ratio (SNR): > 70 dB at 100 MHz over 100 m
  • Return Loss: < -30 dB at 5 KHz
  • Total Harmonic Distortion (THD): < 0.005% at 1 KHz
  • Min-Max Signal Level: < 0.3 V – 1.45 Vp-p
  • Differential Phase Error: ±10° at 135 MHz over 100 m

Chassis and Environmental

  • Enclosure: Painted steel
  • Dimensions: 110mm x 76mm x 24mm (4.33 in. x 2.99 in. x 0.95 in.)
  • Shipping Weight: 0.5 kg (1.1 lbs.)
  • Operating Temperature (Environment): 0° to +40° C (+32° to +104° F)
  • Operating Temperature (Chassis): 31° C (88° F) (S); 38° C (100° F) (R)
  • Operating Humidity (Environment): 20% to 90%, Non-condensing
  • Storage Temperature (Environment): -10° to +60° C (+14° to +140° F)
  • Storage Humidity (Environment): 20% to 90%, Non-condensing

Power, ESD, and Regulatory

  • Maximum Power Consumption: 8 watts (S), 22 watts (R)
  • Power Supply (Not Included): 24vDC / 1.5 Amp
  • ESD Protection: 15kV
  • Regulatory: CE, RoHS

Other

  • Standard Warranty: 2 Years
  • Diagnostic Indicators: Link and power LEDs
  • Compatible Transmitters: DIGI-HD60-S, DIGI-HD70-S, DIGI-HDE-S, FLX-BO4A, DIGI-44B, DIGI-88B, ASW-WP, DIGI-P123
  • Included Items: Installation Guide

Accessories [not included]

  • Power Supply: PS-24D-25
  • IR Emitter: DIGIB-EMT
  • IR Eye: DIGIB-EYE
  • Universal Mounting Bracket: DIGI-PMK1

Distances and picture quality may be affected by cable grade, cable quality, source and destination equipment, RF and electrical interference, and cable patches. Intelix specifications are based on straight-through cabling with standard-grade Cat 5e unless noted otherwise.

Documentation and Downloads

Intelix DIGI-HD60C-S HDMI, bi-directional IR, RS232 and Ethernet via HDBaseT Transmitter, front-right

The front-right perspective of the transmitter is shown in this photo.

Intelix DIGI-HD60C-S HDMI, bi-directional IR, RS232 and Ethernet via HDBaseT Transmitter - Left panel

This photo shows the left side panel.

Intelix DIGI-HD60C-S HDMI, bi-directional IR, RS232 and Ethernet via HDBaseT Transmitter - Right Panel

The right side panel is shown here.

Intelix DIGI-HD60C Tech Specs - PDF

This is the spec sheet for the DIGI-HD60C series, in PDF format.

Intelix DIGI-HD60C Installation Manual - PDF

Here is the Installation Manual for the DIGI-HD60C series, in PDF format.

Purchase Info
Product Description SKU MSRP Your Price Quantity
Intelix HDMI, bi-directional IR, RS232 and Ethernet via HDBaseT Transmitter DIGI-HD60C-S $249.95 $224.96 SOLD OUT
This model has been discontinued. Please click here to see the replacement model.
Intelix Authorized Reseller Seal

Why Cable Solutions?

Design excellence, high quality materials, meticulous workmanship, and superior service...put it all together and you get a superior product. Don't get stuck with bad advice, poor service, slow shipment or an inferior product. If you want the best, here it is.