Introducing the Intelix Flex Matrix System. The FLX-1616 card and cage chassis can accommodate up to eight modular expansion cards. Cards are available to handle HDMI, DVI, VGA, RGB, Y/Pb/Pr component video, and/or HDBaseT inputs, while output card choices include HDMI, DVI, and HDBaseT, so it is possible to use this matrix system to drive both local as well as remote zone outputs. Use standard UTP twisted-pair cabling, such as Cat-6 to connect remote zones via the HDBaseT protocol.
Twisted-pair receivers are sold separately below, so you can get exactly the functionality you need. Use any combination of receivers, up to a total of 16 receivers (add to your cart below):
With built-in switching, scaling, format conversion, audio embedding and native ability to connect to remote zones via HDBaseT, the FLX-1616 can route any type of input to any type of output. Control via front panel push-buttons, the included IR remote, or connect to third-party control systems via RS-232. With so much flexibility and functionality built right in, the FLX-1616 makes it possible to replace a whole rack full of traditional A/V distribution gear with a single, elegant 3RU system. Please read this flyer for more details.
As with virtually all systems that are based upon twisted-pair cable technology, the Intelix Flex Matrix Distribution System will work with virtually any twisted-pair cables, including Cat-5e and Cat-6, but range and system bandwidth are directly related to both distance and cable quality, so to get the highest resolutions at the greatest distances, you will want high-quality, low-skew cables. Check the installation manual for more information. If you want the very best pre-terminated cables, please consider our VideoTwist cables.
Like most Intelix products, the FLX-1616 comes with a two year limited warranty from the manufacturer.
Distances and picture quality may be affected by cable grade, cable quality, source and destination equipment, RF and electrical interference, and cable patches. Intelix specifications are based on straight-through cabling with standard-grade Cat 5e unless noted otherwise.
Here is the front of the FLX-1616 from another angle.
This view of the back panel shows the FLX-1616 Matrix Distribution System with optional FLX-4A and FLX-BI4 input cards as well as FLX-HO4A and FLX-BO4 output cards installed. I/O cards are sold separately - add to your cart below.
Shown in this picture are the four input card options, from top to bottom:
* FLX-HI4A - HDMI w/stereo audio
conversion / imbedding
* FLX-DI4 - DVI
* FLX-VGA - VGA, YPbPr, S-Video,
composite video, each with scaling
* HDBaseT w/RS232, bi-directional IR
This image shows the three output card options, from top to bottom:
* FLX-HO4 - HDMI w/digital audio
de-embedding and analog stereo
audio conversion
* FLX-DO4 - DVI
* FLX-BO4 - HDBaseT
*
FLX-BO4A - HDBaseT w/analog audio de-embedding
The Flex Matrix Flyer reveals additional details about this highly flexible matrix distribution system. PDF format.
Here are the Tech Specs. PDF.
This is the FLX-1616 Installation Manual and Operation Guide, in PDF format.
Design excellence, high quality materials, meticulous workmanship, and superior service...put it all together and you get a superior product. Don't get stuck with bad advice, poor service, slow shipment or an inferior product. If you want the best, here it is.