The Intelix DIN-RACK-KIT-F 19" Balun Mounting Tray provides a
simple and effective way to rack-mount Intelix baluns, or just about any small device. The DIN mounting
rails will accommodate up to 26 balun-sized devices. If you want to mount larger devices, the spacing can be
easily adjusted, as required. The matching
AVO-CLIP-F clips are sold separately, so you can purchase the exact number that you need.
Like most Intelix products, the AVO-HR-F comes with a two year limited warranty from the manufacturer.
The 19" Intelix DIN-RACK-KIT-F tray is the ideal solution for rack mounting a variety of baluns, completely independent of signal format. Simply mount an Intelix AvoCat Series or Classic Series balun to an Intelix AVO-CLIP-F, and then snap the AVO-CLIP-F to the DIN-RACK-KIT-F tray. Each DIN-RACK-KIT-F features two DIN rails which allow for the mounting of up to 26 AVO-CLIP-Fs.
The Intelix AvoCat Series of baluns is the ideal solution for sending audio and video over structured cabling. When signal quality matters, choose Intelix.
Here is another angle.
In this example, 15 Intelix AvoCat Series baluns are mounted to a 19" Intelix DIN-RACK-KIT-F tray. The pictured setup provides (2) s-video channels (11) composite video channels, (2) RGB channels, and (10) stereo audio channels. The DIN-RACK-KIT-F tray supports up to 52 small Intelix baluns and 26 large Intelix baluns.
Here is the matching AVO-CLIP-F Mounting Clip. The Mounting Tray does not include any clips, so you can specify the exact number that you need below.
Here are the Technical Specifications in PDF format.
Design excellence, high quality materials, meticulous workmanship, and superior service...put it all together and you get a superior product. Don't get stuck with bad advice, poor service, slow shipment or an inferior product. If you want the best, here it is.