Need some help? Give us a call: toll-free phone
or email:
Intelix Logo

Intelix INT-HD70-RX HDBaseT HDMI Transmitter

HDMI, IR, RS232, and Ethernet over Single Twisted Pair

Intelix INT-HD70-TX HDMI, bi-directional IR, RS232 and Ethernet  via HDBaseT Transmitter

Intelix INT-HD70-RX HDMI, bi-directional IR, RS232 and Ethernet via HDBaseT Transmitter

The Intelix INT-HD70-TX HDBaseT HDMI Transmitter handles HDMI, bi-directional IR, bi-directional RS232 and Ethernet over a single twisted-pair cable, such as cat-5e or Cat-6.

Leveraging HDBaseT technology for enhanced transmission over shielded and unshielded twisted pair cabling, the INT-HD70-TX features power over HDBaseT (PoH), allowing flexible power on either the transmitter or receiver. Plus, other compatible PoH devices will power or be powered by the INT-HD70-TX.

The INT-HD70-TX supports 1080p, and 3D video up to 70 meters (230 feet). 4K x 2K up to 40 meters (131 feet).  Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations.  The system is HDMI v1.4 and HDCP 1.4/2.2 compliant, so it handles advanced HDMI video formats, including (but not limited to) 1080p, 4K, 2D, 3D, 120Hz, 240Hz, along with up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio lossless audio formats.

Ideal for use with Intelix INT-HD70-RX HDBaseT receivers (add to cart below).

Wired remote IR emitters and receivers are available as an option, as are a 12-slot rack-mounting kit and a rack-mount power supply for up to 12 devices (add to cart below).

As with virtually all systems that are based upon twisted-pair cable technology, the Intelix INT-HD70-TX HDBaseT HDMI Transmitter will work with virtually any twisted-pair cables, including Cat-5e and Cat-6, but range and bandwidth is directly related to both distance and cable quality, so to get the highest resolutions at the greatest distances, you will want high-quality, low-skew cables.  If you want the very best pre-terminated cables, please consider our VideoTwist cables.

Like most Intelix products, the INT-HD70-TX comes with a two year limited warranty from the manufacturer.

Intelix's Description

INT-HD70-TX

HDMI Slim 70M, POH, IR and Control HDBaseT Extender - Transmitter

The Intelix INT-HD70-TX extends HDMI, IR, and RS232 over a single solid core shielded Category 5e or greater cable using the Valens VS010TX HDBaseT chip. The INT-HD70-TX supports a 1080p video signal, including HDCP 2.2 and multichannel audio, up to 70m, as well as 3D and 4K x 2K (UHD) signals up to 40m. Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. Flexible power design allows the units to be powered at either the TX or RX end, and only one power supply is required. The power supply is included; IR accessories (DIGIB-EMT and DIGIB-EYE) are sold separately.

The INT-HD70 series extenders are compatible with all Intelix HDBaseT product offerings and any product that meets the HDBaseT specifications.

Specifications


Product Line: INT-HD70-TX
Input/Output Connections
HDMI Input One (1) HDMI Type A Receptacle
HDBaseT Port One (1) 8P8C port (Shielded RJ45)
Power One (1) 5.5 mm OD, 2.6 mm ID Threaded Barrel
RS232 Port One (1) 3-pin Removable Terminal Block Connector
IR Input One (1) 3.5 mm TRS Receptacle
IR Output One (1) 3.5 mm TRS Receptacle
Supported Audio, Video and Control
Video Resolutions SMPTE: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, UHD/30
VESA: Resolutions up to 1920x1200
Color Depth: 24, 30, 36, 48bit
Maximum Video Compatibility at 70 m Deep Color 36/30/24 Bit at 1080p
Maximum Video Compatibility at 40 m 1080p 3D, UHD/30, Deep Color 48 Bit at 1080p
Video Compliance HDMI 1.4 and HDCP 1.4/2.2
Embedded Audio Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
ARC (Audio Return Channel) No
HEC (HDMI Ethernet Channel) No
CEC (Consumer Electronics Control) Yes (Pass-through Only)
Supported Baud Rates 2400, 4800, 9600, 19200, 38400, 57600, 115200
Supported IR Carrier Frequencies 33 to 55 kHz
HDBaseT Signal Characteristics
Maximum Distance 70 m (229 ft)
Cable Requirements Continuous shielded solid core Cat 5e or greater with TIA/EIA-568B crimp pattern (no couplers in-line)
Bandwidth 10.2 Gbps
HDBaseT Chipset VS010TX
Chassis and Environmental
Construction Black Alumininum
Dimensions (H x W x D) 16.2 mm x 115 mm x 84 mm (0.64 in x 4.73 in x 3.31 in)
Operating Temperature 0° to +40° C (+32° to +104° F)
Operating Humidity 20% to 90%, Non-condensing
Storage Temperature -10° to +60° C (+14° to +140° F)
Storage Humidity 20% to 90%, Non-condensing
Power and Regulatory
Power Input 24V DC 1.25A or 48V DC PoH (Power over HDBaseT)
Power Output 48V DC PoH (Power over HDBaseT)
Power over Ethernet (PoE) Compatibility 802.3af Alternative A
Power Consumption 5 watts
ESD Protection 15kV air, 8kV contact
Regulatory FCC, CE, RoHS
Other
Warranty 2 years
Diagnostic Indicators HDCP, Link, and Power
Included Accessories Installation Guide, Power Supply, 3-pin Removable Screw Terminal
Optional Accessories IR emitter (DIGIB-EMT), IR receiver (DIGIB-EYE), rack mount (INT-EXRMK), rack mounted power supply (PSU12)
HDBaseT Receiver (A/V, PoE, Control) Compatibility DIGI-HD60C-R, DIGI-HDX-R, FLX-64, INT-HD70-RX, INT-HDX100-RX, DIGI-BSR-4K
HDBaseT Receiver (A/V, Control) Compatibility FLX-BI4
HDBaseT Receiver (A/V and PoE) Compatibility DIGI-HD60-R
Distances and picture quality may be affected by cable grade, cable quality, source and destination equipment, RF and electrical interference, and cable patches.

Documentation and Downloads

Intelix INT-HD70-TX HDMI, bi-directional IR, RS232 and Ethernet via HDBaseT Transmitter, back

Intelix INT-HD70-TX HDMI extender transmitter, back

Intelix INT-HD70-TX Tech Specs - PDF

This is the spec sheet for the INT-HD70-TX, in PDF format.

Intelix INT-HD70-TX Installation Guide - PDF

Here is the Installation Manual for the INT-HD70 series, in PDF format.

Purchase Info
Product Description SKU MSRP Your Price Quantity
Intelix HDMI, bi-directional IR, RS232 and Ethernet via HDBaseT Transmitter INT-HD70-TX $387.84 $329.95
Intelix HDMI, bi-directional IR, RS232 and Ethernet via HDBaseT Receiver INT-HD70-RX $387.84 $329.95
Universal Infrared (IR) Emitter for Intelix Devices
DIGIB-EMT $16.49 $13.95
Universal Infrared (IR) Receiver for Intelix Devices
DIGIB-EYE $21.49 $18.95
12 Slot Rack Mount Kit for INT-Series HDBaseT Extenders INT-EXRMK $399.95 $349.95
Rack-Mount Power Supply for up to 12 Devices INT-PSU12 $1420.00 $1277.95
SSL Secure Site Logo
Intelix Authorized Reseller Seal

Why Cable Solutions?

Design excellence, high quality materials, meticulous workmanship, and superior service...put it all together and you get a superior product. Don't get stuck with bad advice, poor service, slow shipment or an inferior product. If you want the best, here it is.